– The Turkish machines are of the highest quality due to careful manufacturing supervision.
– Siemens soft starters are used for the start-stop system to prevent electrical overload during the initial start.
– Double fan system (one inside and one outside) for the electrical cabinet.
– Hydraulic pressure is generated by a screw pump which operates very quietly.
– Electric servo drives are manufactured by Mitsubishi Electric.
– Each machine undergoes a comprehensive final inspection based on 160 points (with the responsible person’s signature).
– All machines are tested for three days, including testing them at maximum loads.
Special advantages of the press brake machines:
– The backgauge system is made of aluminum casting and extruded aluminum, providing incredible speed (500 mm/sec) and sturdiness.
– The adjustment of the backgauge’s rail path can be made parallel with screws every 10 centimeters, using the bear’s paw adjustment track.
– A bear deformation correcting beam is constructed along the entire length, with adjusting screws every 10 centimeters, to correct potential material warping over the years.
– Double and highly robust sliding wires are used on both sides for stability and precision.
– Mechanical tilt inhibitors are installed on the bear’s rail to prevent damage to the working cylinder in case of excessive tilting to one side.
– Standard daylight is 500 mm.
– Stroke length is 280 mm.
– Approach speed is 180 mm and return speed is 150 mm.
